Keshav Engineering

Construction of Tray Dryer:It consists of a chamber whose wall is insulated by thick glass wool or suitable heat insulating material. Inside the chamber, there are various trays on which wet materials are placed. The number of trays depends on the size of the chamber. For laboratory purposes, a minimum of 3 trays is required. There should be an appropriate distance between the upper, middle, and lower tray. The dryer is also attached to the provision of free: air inlet and air outlet. The fan in the dryer is used to circulate air over the material placed in trays. The heater is also provided inside to facilitate uniform heating. The door of the heater is explosion-proof and is locked with the help of spring-loaded ball latches with suitable pressure. Door lips are having a Neoprene rubber gasket to prevent leakages.Working of Tray Dryer:Wet material is spread into trays and placed into the chamber. The doors are closed. The air is introduced through an inlet and heater air heated up. Hot air is circulated by Tan over the tray. There should be uniform airflow otherwise proper drying will not be achieved. Even baffles are used to distribute the air uniformly over the trays. Some moist air is continuously vented through the outlet. The fresh air enters through the inlet. The water evaporates from the interior of the solid due to hot air. In the end, trays are removed from the chamber and dried material is collected.Advantages of Tray Dryer:Tray Dryer is the most conventional dryer used very widely and still being used where the moisture content is more and where the product has to be dried at low temperature for long hours.It is a batch process and can also be used where the quantity of material is less.In the tray dryers, the handling of the materials can be done without losses.The batch sizes in the pharmaceutical industry are relatively small 250 kg or less per batch compared with the chemical industry 1000 kg or more per hour.

Keshav Engeneering” is a distinguished Manufacturer of a wide range of Stainless Steel Storage Tanks, Stainless Steel Reactors, Stainless Steel Silo, etc. Founded in the year 2018, we are a Sole Proprietorship company that is incepted with an objective of providing high quality products in diverse specifications within scheduled time period. Situated in Surat (Gujarat, India), we manufacture the products in accordance with set industry norms.

What is vacuum tray dryer?Vacuum Tray Dryer (VTD) is an important laboratory equipment used for drying high grade oxygen and temperature sensitive materials. They are specifically designed to dry hygroscopic substances (products that attract moisture from their surroundings), leaving minimal residual moisture in them.